360G Adhesive PU Gun Foam (GUN)
360G

360G Adhesive PU Gun Foam (GUN)

Silfix 360G is a one component aerosol polyurethane adhesive foam curing swiftly with moisture. Providing very fast and powerful adhesion for various construction materials, especially highly recommended for heat insulation systems.

  • Best for mounting heat insulation panels and filling voids during adhesive application.
  • Advised for wooden type construction materials adhesion to concrete, metal etc.
  • Applications needed minimum expansion.
  • Mounting and isolation for frames of windows and doors.
  • Powerful adhesion of polystyrene heat panels (XPS and EPS).
  • Wall plugging within two hours.
  • More economical. Ready to use in aerosol can.
  • Up to 14 m2 heat insulation panel adhesion for each can.
  • Minimum expansion during drying period.
  • After dried, no further expansion and shrinkage.
  • A lighter material compared to plaster, alternative material, used in heat insulation systems.
  • No more extra burden or weight to building.
  • High yield up to 55 liters, depending on the humidity and temperature.
  • Usable at low temperature like 0 °C
  • It does not contain any propellant gases which are harmful to the ozone layer.
GUN APPLICATION
BasisPolyurethane Prepolymer
Curing SystemMoisture cure
Specific Gravity 21±3 Kg/ m3
(ASTM D1622)
Tack-Free Time (1 cm width) 6±2 min (ASTM C1620)
Cutting Time (1cm width)20-45 min(ASTM C1620)
Cure-Time 24 hours
Foam ColourLight pink
Shear Strength82 kgf/cm²
Yield50-55 L(ASTM C1536)
Fire Class of the Cured Foam B3(DIN 4102-1)
Expanding VolumeMinimal
Thermal Conductivity 0,036 W/m.k (at 20°C) (DIN 52612)
Compression Strength0,03 MPa(DIN 53421)
Water Absorptionmax. 1 vol% (DIN 53428)
Can Temperaturemin.5°C max. +30°C
Temperature Resistance-40°C to +100°C
Application Temperature0°C to +30°C
TypeVolume Box
-Gw. 850 gr.12

📄 TDS PDF İndir

Category: