360 Adhesive PU Foam (Straw)
Silifix 360 is one component aerosol polyurethane adhesive foam curing swiftly with moisture. Providing very fast and powerful adhesion for various construction materials, especially highly recommended for heat insulation systems. It is designed for easy dispensing through the straw adapter included with each can.
-
Application Areas
-
Features
-
TECHNICAL PROPERTIES
-
PACKAGE
-
TDS
- Best for mounting heat insulation panels and filling voids during adhesive application.
- Advised for wooden type construction materials adhesion to concrete, metal etc.
- Applications needed minimum expansion.
- Mounting and isolation for frames of windows and doors.
- Powerful adhesion of polystyrene heat panels (XPS and EPS).
- Wall plugging within two hours.
- More economical. Ready to use in aerosol can.
- Up to 9 m² heat insulation panel adhesion for each can.
- Minimum expansion during drying period.
- After dried, no further expansion and shrinkage.
- A lighter material compared to plaster, alternative material, used in heat insulation systems.
- No more extra burden or weight to building.
- High yield up to 45 liters, depending on the humidity and temperature.
- Usable at low temperature like 0 °C
- It does not contain any propellant gases which are harmful to the ozone layer.
| Basis | Polyurethane prepolymer | |
| Curing System | Moisture cure | |
| Specific Gravity | 22±3 Kg/ m3 | (ASTM D1622) |
| Tack-Free Time (1 cm width) | 6±2 min | (ASTM C1620) |
| Cutting Time (1cm width) | 20-45 min | (ASTM C1620) |
| Cure-Time | 24 hours | |
| Foam Color | Light pink | |
| Yield | 30-45 L | (ASTM C1536) |
| Elongation at break | 13,6% | |
| Fire Class of the Cured Foam | B3 | (DIN 4102-1) |
| Expanding volume (at wall) | Minimal | |
| Compression Strength | 0,03 MPa | (DIN 53421) |
| Tensile Strength | 12,1 N/ cm2 | |
| Temperature Resistance | -40°C to +100°C | |
| Application Temperature | 0°C to +30°C | |
| Type | Volume | Box |
| - | Gw. 850 gr. | 12 |
