165G Roof & Tile PU Adhesive
165G is a one component aerosol polyurethane adhesive foam curing swiftly with moisture and specifically formulated for laying roofing tiles, thanks to its characteristics of greater mechanical strength and adhesion to concrete and brick to insulating materials such as polystyrene and cork.
- Description
- Application Areas
- Features
- Technical Properties
- Package
- tds
Description
165G is a one component aerosol polyurethane adhesive foam curing swiftly with moisture and specifically formulated for laying roofing tiles, thanks to its characteristics of greater mechanical strength and adhesion to concrete and brick and insulating materials such as polystyrene and cork.
- Used best for laying of tiles and tiles construction of insulation on roof repair and consolidation of roofing .
- Laying wooden elements and insulation panels for thermal and acoustic insulation purposes.
- Seals and fittings in general where minimum expansion is needed.
- Mounting and isolation for frames of windows and doors.
- Powerful adhesion of roofing tiles.
- Instant adhesion and roof plugging within two hours.
- Exceptional resistance to wear and to the action of the wind.
- Not form thermal bridges, thanks to the excellent thermal insulation.
- Thanks to its modern chemical formulation, it is highly thixotropic.
- More economical. Ready to use in aerosol can.
- Up to 14 m2 roofing tile adhesion for each can.
- Minimum expansion during drying period.
- After dried, no further expansion and shrinkage.
- No more extra burden or weight to building.
- High yield up to 55 liters, depending on the humidity and temperature.
- Fire Class: E (According to EN 13501-1. It refers to B2 for DIN 4102).
- Usable at low temperature like 0 °C
- It does not contain any propellant gases which are harmful to the ozone layer.
| TECHNICAL PROPERTIES | ||
| Basis | Polyurethane Prepolymer | |
| Curing System | Moisture cure | |
| Specific Gravity | 21±3 Kg/ m3 | (ASTM D1622) |
| Tack-Free Time (1 cm width) | 6±2 min | (ASTM C1620) |
| Cutting Time (1cm width) | 20-45 min | (ASTM C1620) |
| Cure-Time | 24 hours | |
| Foam Color | Light pink | |
| Yield | 50-55 L | (ASTM C1536) |
| Yield metric | ~14 m2 | |
| Fire Class of the Cured Foam | B3, F | (DIN 4102-1) (EN 13501-1) |
| Expanding volume | Minimal | |
| Thermal Conductivity | 0,036 W/m.k (at 20°C) | (DIN 52612) |
| Compression Strength | 0,03 MPa | (DIN 53421) |
| Water Absorption | max. 1 vol% | (DIN 53428) |
| Shrinkage | <5% | |
| Temperature Resistance | -40°C to +100°C | |
| Application Temperature | 0°C to +30°C |
| Type | Volume | Box |
|---|---|---|
| Summer +5 | Gw. 850 g. | 12 |
| Summer +5 | Gw. 570 g. | 12 |
