HM170 EVA Hot Melt Straight Edge Banding Adhesive
Silifix HM 178 is a synthetic resin and EVA based hot melt adhesive of thermoplastic characteristic that gives perfect results with straight edge banding works where lower softening point and fast bonding is needed.
- Description
- Application Areas
- Features
- Technical Properties
- Package
- TDS
Description
Synthetic resin and EVA-based hot melt adhesives demonstrate thermoplastic characteristics.
- For Straight Edge Banding
- Environmentally Friendly
- Economical
-
It is recommended that ambient temperature should be above 15oC, air moisture 65-75% and material moisture 8-10% during application, and the adhesive should spread throughout one side of the object to Be adhered.
-
Hot-Melt is used for curved edge banding, coating and massive adhesion operations on all kinds of domestic and foreign edge banding machines, also manually operated machines. It is short open time adhesive.
• Appropriate when immediate bonding is required.
• Environmentally friendly.
• Economical.
• High green strength.
• Non-sticky surfaces.
• Odourless.
• Easy to use.
| Color | Natural | |
| Appearance | Granular | |
| Softening point | 90 ± 2ºC (Ring and Ball) (ASTM E28) | (ASTM E28) |
| Specific Gravity | 1,28 g/cm3 | (ASTM D792) |
| Thermosel viscosity | 100000mPas at 200°C | (ASTM D3236) |
| Open time | 45 - 50 seconds | |
| Tank Temperature | 180 – 200 ºC | |
| Temperature Roller | 200 – 220°C | |
| Feeding Speed | 10 – 27 m / min. | |
| Water resistance | Excellent | |
| Roller Pressure | 3 – 5 Kg. / cm² |
| Type | Volume | Box |
|---|---|---|
| 180°C - 200°C | 25 kg | 1 |
